gigabit ethernet/P 2.0 -force ge1 to ge0 w/o reboot ?

From: Sharma, Dayanand (CAP, GEFA, Contractor) (Dayanand.Sharma@gecapital.com)
Date: Wed Oct 16 2002 - 15:35:43 EDT

• Next message: Chip Paswater: "lp not printing multiple copies?"
• Previous message: Darryl Pace: "kernel params require a reboot"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Gurus,

I had gigabit ethernet/P 2.0 card on Sun Fire F6800 , earlier in a different
slot which later got installed in a different slot. As of now I see ge1 on
the system and no ge0. Is there any way, I can force ge1 to ge0 without a
reboot.Following are some outputs from the system for reference.

        grep ge /etc/path_to_inst
        "/ssm@0,0/pci@1f,700000/network@2" 1 "ge"
        "/ssm@0,0/pci@1f,600000/network@1" 0 "ge"

        ifconfig ge0 plumb
        ifconfig: SIOCSLIFNAME for ip: ge0: no such interface
   ifconfig ge1 plumb
   (goes through w/o any error message)

TIA
Dayanand
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Chip Paswater: "lp not printing multiple copies?"
• Previous message: Darryl Pace: "kernel params require a reboot"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:07 EDT