From: Ed Crotty (ecrotty@vantage.com)
Date: Wed Oct 09 2002 - 12:08:41 EDT
In a 220r, I have the following disk layout on my boot drive :
Part Tag Flag Cylinders Size Blocks
0 root wm 0 - 1063 1.47GB (1064/0/0)
3073896
1 unassigned wm 0 0 (0/0/0)
0
2 backup wm 0 - 2835 3.91GB (2836/0/0) 8193204
3 unassigned wm 1064 - 1772 1000.15MB (709/0/0)
2048301
4 usr wm 1773 - 2836 1.47GB (1064/0/0) 3073896
5 var wm 2837 - 3545 1000.15MB (709/0/0)
2048301
6 unassigned wm 3546 - 24619 29.03GB (21074/0/0) 60882786
7 unassigned wm 0 0 (0/0/0) 0
As you can see, I have one free slice curently (that I can put the remainder
of the disk space into) that I could use for the metadb on the boot drive..
The other drive will be setup exactly the same.. So I would have another slice
there.
Can I use just these two slices (slice 7) on both drives for the metadb? Is
it enough? Is there any potential problems?
The command I would run would be something like :
metadb -a -f -c3 /dev/dsk/c0t0d0s7 /dev/dsk/c0t1d0s7
Am I going to be running into any headaches down the road with recovery?
Thanks!
-ed
> -----------------------------------------------
> Ed Crotty
> Vantage Learning
> 113 Floral Vale Blvd.
> 215-579-8390 ext. 1119
> www.vantagelearning.com
>
> **************************************************************************
> This e-mail and any files transmitted with it are intended for the use of
the addressee(s) only and may be confidential and covered by the
attorney/client and other privileges. If you received this e-mail in error,
please notify the sender; do not disclose, copy, distribute, or take any
action in reliance on the contents of this information; and delete it from
your system. Any other use of this e-mail is prohibited.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:05 EDT