From: splat@4way.us
Date: Wed Oct 09 2002 - 04:46:21 EDT
Gurus,
Typically in the past I have run the luxadm probe command with results
similar to this.
root@luxman:/noc/rw/home/rromero# luxadm probe
Found Enclosure(s):
SENA Name:Lux1 Node WWN:508002000008f9e0
Logical Path:/dev/es/ses4
Logical Path:/dev/es/ses5
Logical Path:/dev/es/ses12
Logical Path:/dev/es/ses13
However, I had the backplane on the A5200 showing faulted so I just
swapped out it out with a good one and put the original disks back in.
Everything appears to have booted normally and VM isn't complaining, but
now I get the following type of output when I run the luxadm probe command
root@luxman:~# luxadm probe
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node WWN:20000020379cf72e Device Type:Disk device
Logical Path:/dev/rdsk/c3t0d0s2
Logical Path:/dev/rdsk/c5t0d0s2
Node WWN:20000004cf9912f1 Device Type:Disk device
Logical Path:/dev/rdsk/c3t1d0s2
Logical Path:/dev/rdsk/c5t1d0s2
Node WWN:20000020379cfc23 Device Type:Disk device
Logical Path:/dev/rdsk/c3t2d0s2
etc etc etc etc
Is there something I missed that I should have done when replacing the
A5200? This is on an E6500, Solaris 8, VM 3.2
TIA,
Randy Romero
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:05 EDT