From: jimi beyylorn (jimbeyyl@yahoo.com)
Date: Mon Oct 07 2002 - 07:25:38 EDT
Hello,
First of all thank you for the quick overwhelming responses
"Donaldson, Mark" <Mark.Donaldson@experianems.com
"John Kingsland" <johnk@dtmr.com>
soulation is :
i must modify the /kernel/drv/sd.conf file. By default Solaris
only
creates one LUN per target.
Of course always save a copy of the original file.
For the appropriate target change this
name="sd" class="scsi"
target=4 lun=0;
To this
name="sd" class="scsi"
target=4 lun=0;
name="sd" class="scsi"
target=4 lun=1;
name="sd" class="scsi"
target=4 lun=2;
Then boot -r the server. The device files for the additional LUNs
should be
available.
-----------------------------------------------------------------------------------------
-----Original Message-----
From: jimi beyylorn [mailto:jimbeyyl@yahoo.com]
Sent: Wednesday, October 02, 2002 3:12 AM
To: sunmanagers@sunmanagers.org
Cc: jimbeyyl@yahoo.com
Subject: problem two lun in Disk array
Hello
I connected Disk Array Runtop 6180 with 8 hard disk By HostA to Axus (SunBlade1000) ,I Configure In Target 3 Two Raid 5 that every Raid contain 4 hard disk ,that One Raid in Lun0,Other Raid in Lun1 .
When I used probe-scsi-all command in OK mode , System detected Disk Array in Target 3 with Two LUN. But when boot Solaris By boot -r command ,used format command display Only Lun0 in c2t3d0 ,not Display Lun1 .
Please help me
Faith Hill - Exclusive Performances, Videos, & more
faith.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:04 EDT