From: hep_mkj@myrealbox.com
Date: Thu Oct 03 2002 - 14:08:35 EDT
Dear Sun Gurus,
Hello.
My system specification is 'SunOS dusun3 5.7 Generic_106541-02 sun4u
sparc SUNW,Ultra-5_10'.
When I open (switch on) the system, it says:-
-----------------------------------------------------------------------
Evaluating: boot
Can't open boot device
ok
------------------------------------------------------------------------
Then I used the command'boot -s', the output is:-
-----------------------------------------------------------------------
ok boot -s
Boot device: /pci@1f,0/pci@1,1/ide@3/disk@0, 0:a Files and args: -s
can't open boot device
ok
-----------------------------------------------------------------------
After that the command ''probe-ide' (as mentioned by the Sun's Guru), it
says:-
-------------------------------------------------------------------------
Device 0 (Primary Master )
Not Present
Device 1 (Primary Slave)
Not Present
Device 2 ( Secondary Master )
Removable ATPI Model: CRD -8322B
Device 3 ( Secondary Slave )
Not Present
ok
-------------------------------------------------------------------------
How should I proceed further. Waiting for your response.
With Regards,
Manoj Jha
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:01 EDT