From: Karoly VEGH (karoly.vegh@uta.at)
Date: Wed Oct 02 2002 - 09:10:16 EDT
Hi,
I'm trying to get the custom JumpStart install method to work, and though
i read myself through _really_ much docs, i dont find my mistake, maybe
someone here has an idea:
i did everything according to the docs, setup_install_server,
add_to_install_server, (i installed JumpStart on a Solaris 5.6
(10.10.10.214) in /data/JumpStart)
my add_install_client command:
./add_install_client -c 10.10.10.214:/data/JumpStart -s
10.10.10.214:/data/JumpStart/Solaris_8/ -p 10.10.10.214:/data/JumpStart -n
10.10.10.61:DNS\(255.255.255.0\) -t /data/JumpStart/Solaris_8/Tools/Boot/
cat2-adm sun4u
The rules:
root@backup1:/data/JumpStart>tail -1 rules
hostname cat2-adm - cat2_class set_root_pw
root@backup1:/data/JumpStart>cat rules.ok
hostname cat2-adm - cat2_class set_root_pw
# version=2 checksum=4403
root@backup1:/data/JumpStart>
My sysidcfg:
root@backup1:/data/JumpStart>cat sysidcfg
name_service=NONE
network_interface=hme0
{hostname=cat2-adm
default_route=10.3.2.254
ip_address=10.10.10.226
netmask=255.255.255.0
protocol_ipv6=no}
root_password=xxxxxxxxxxx
security_policy=NONE
system_locale=en_GB.ISO8859-15
timezone=CET
timeserver=localhost
terminal=vt100
Profile file for cat2:
root@backup1:/data/JumpStart>cat cat2_class
install_type initial_install
system_type server
partitioning default
cluster SUNWCuser
cluster SUNWCown delete
cluster SUNWCtltk delete
cluster SUNWCxgl delete
cluster SUNWCxil delete
filesys srvr:/usr/openwin - /usr/openwin ro,intr
root@backup1:/data/JumpStart>
but when i do a boot net - install at cat2 from the ok prompt:
Configured interface hme0
Searching for configuration file(s)...
Using sysid configuration file 10.10.10.214:/data/JumpStart/sysidcfg
The system is coming up. Please wait.
Starting remote procedure call (RPC) services: sysidns done.
Starting Solaris installation program...
Searching for JumpStart directory...
not found
Warning: Could not find matching rule in rules.ok
Press the return key for an interactive Solaris install program...
this is my problem here...
backup1 is (10.10.10.214) is my install-server:
root@backup1:/data/JumpStart>dfshares
RESOURCE SERVER ACCESS TRANSPORT
backup1:/data/JumpStart backup1 - -
root@backup1:/data/JumpStart
if i exit the the interactive install, then i get a shell:
To restart the Solaris installation program,
type "suninstall".
# hostname
cat2-adm
# uname -a
SunOS cat2-adm 5.8 Generic_108528-13 sun4u sparc SUNW,Ultra-250
# ls
etc kernel var
# pwd
/tmp/root
# mkdir bu
# mount -F nfs -o ro 10.10.10.214:/data/JumpStart /tmp/root/bu
# ls bu
any_machine host_class rules.ok upgrade
cat2_class installer set_root_pw x86-begin
check net924_sun4c Solaris_8 x86-begin.conf
Copyright rules sysidcfg x86-class
also i see it over nfs, what is wrong, why does he say:
Searching for JumpStart directory...
not found
on the install server the ethers and the hosts are ok:
root@backup1:/data/JumpStart/Solaris_8/Tools>grep cat /etc/hosts
10.10.10.226 cat2-adm.utaiop.at
root@backup1:/data/JumpStart/Solaris_8/Tools>grep cat /etc/ethers
8:0:20:d2:f:41 cat2-adm.utaiop.at
8:0:20:d2:f:41 cat2-adm
root@backup1:/data/JumpStart/Solaris_8/Tools>
amikor boot net - install utan eljut idaig:
...majd inditja az interaktivot.
root@backup1:/data/JumpStart>cat /etc/dfs/dfstab
share -F nfs -o ro,anon=0 /data/JumpStart
root@backup1:/data/JumpStart>
why doesnt it see the JumpStart directory?
any help is appreciated.
Charlie
-- Yetsten poss omm-moy owf, vonn da yayzooss show English graydit hot, don is diss show long goo-add gnu-og fee-a ike, es tsneeacktal. _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:25:01 EDT