SUMMARY: What port should I open to export display

From: B Bong (sunmoon208@yahoo.com)
Date: Mon Sep 23 2002 - 21:28:12 EDT


Hi ALL,

Thank you for much for all your reply.
I got the answer instantly after I send out
my question.

The answer are

(1) open port 6000. X11 traffic is port from 6000 up.

(2) Most of them pointed out to me to use ssh
tunneling
    It protects the machine behind the firewall more
    than opening other port and is more secure.

Thank you so much to all for the answer.

Regards,
Andrew

--- B Bong <sunmoon208@yahoo.com> wrote:
> Dear Sun Managers,
>
> I've the following configuration:
>
>
> ______________ __________ _____
> | Netra 1125 |___| Firewall |____| U10 |
> |____________| |__________| |_____|
>
>
>
> and I need to export my display to U10.
> Without the firewall, I'm able to xhost +
> and export my display to U10.
>
> However, with introduce of the Firewall in between,
> I'm unable to display my display to U10
>
> My question is , what port should I need to open for
> my firewall in order for me to display on a U10
> machine?
>
> TIA.
>
> Andrew
New DSL Internet Access from SBC & Yahoo!
http://sbc.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:58 EDT