From: Ian Clements (ian@artisan.com)
Date: Thu Sep 12 2002 - 13:12:48 EDT
Greetings all,
We recently began purchasing Sun Blade 100's with 2 graphics cards for
some of our designers.
Our normal practice is to jumpstart incoming machines with the most recent
2.8 and patch bundle. However, these dual-headed displays will not work
using
our jumpstart procedure (they will work with the installed software).
When jumpstarted, the primary display "sort of" works (meaning some overlay
planes are a bit screwed up. If we remove the second graphics card, the
system works
correctly. If we run the standard supplied image it all works.
Sun's recommendation was to grab another set of patches and apply them.
With this
bundle, there is no suggested patch order (which seems really strange)
making
installation "interesting" to say the least.
Has anyone been successful installing 2.8/latest patch bundle on a Sun
Blade 100
with two (or more) displays? If so, what's the secret?
TIA,
Ian
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:55 EDT