SUN PCi 400Mhz

From: Marcelino Mata (mmata@multimatic.com)
Date: Tue Sep 10 2002 - 14:36:17 EDT

• Next message: Christopher L. Barnard: "manually setting MAC before the interface comes up"
• Previous message: Carl Ma: "read DLT8000 tape on DLT4000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I do not know if I am out of luck here but I inserted 2 x 128Mb PC133 RAM in
one our SUN PCi 400Mhz cards and things went from bad to worse. At first it
only reported 128Mb installed. After I replaced the RAM with SUN PCi
certified PC100 RAM (64Mb and 128Mb). The card stopped working completely.
Solaris no longer sees the card. I tried the card on another workstation
without any luck.

Does anyone know if there is some trick to resetting the card? ( I tried
pulling out the onboard battery). Or have I killed the card?

Marcelino
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Christopher L. Barnard: "manually setting MAC before the interface comes up"
• Previous message: Carl Ma: "read DLT8000 tape on DLT4000"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:55 EDT