From: Dirk Bönning (dirk.boenning@ccf.de)
Date: Mon Sep 09 2002 - 08:08:13 EDT
Hello,
sorry for a mistake. The OBP Command includes "r" for resolution. So
the correct command (and what I've really done) is:
setenv output-device screen:r1024x768x70
And yes, I've checked the suported resolutions for the pgx (I've even
tried the different refresh rates)
TIA, Dirk.
-------- Original Message --------
Hello,
this drives me crazy. I try to configure the screen console resolution
on a ultra 5. For the monitor I need a resolution of 1024x768.
With the m64config command I could setup the resolution within the X
environment. This works well. But one system will work without any
graphical support. So I need the console to work under this resolution.
The m64config command doesn't change anything in the console mode.
I've set in OBP:
setenv output-device screen:1024x768x70
But this doesn't change anything. The system stills come up with the sun
default of 1152x900x66. I've reset and reboot -r. No changes at all.
Any idea at all ??
TIA, Dirk.
CCF AG
Dirk Bvnning
Daimlerstrasse 10
D-64347 Griesheim
t. +49 (0)6155/6668-38
f. +49 (0)6155/6668-68
e. dirk.boenning@ccf.de
w. www.ccf.de
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:54 EDT