From: Anirudha Sharma Bhamidipati (as@daycohost.com)
Date: Fri Sep 06 2002 - 09:10:30 EDT
Hi,
I trying to block ping,could you please help?
Anirudha Sharma Bhamidipati
-----Original Message-----
From: sunmanagers-admin@sunmanagers.org
[mailto:sunmanagers-admin@sunmanagers.org] On Behalf Of
sunmanagers-request@sunmanagers.org
Sent: Thursday, September 05, 2002 6:56 PM
To: sunmanagers@sunmanagers.org
Subject: sunmanagers digest, Vol 1 #1592 - 19 msgs
Send sunmanagers mailing list submissions to
sunmanagers@sunmanagers.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
or, via email, send a message with subject or body 'help' to
sunmanagers-request@sunmanagers.org
You can reach the person managing the list at
sunmanagers-admin@sunmanagers.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of sunmanagers digest..."
Today's Topics:
1. SUMMARY:ksh (sridhara pk)
2. Installing Solaris 9 on RAID 5 (Eugene Kushnirskiy)
3. CMSynergy on solaris 8 client connectivity problem (sridhara pk)
4. SUMMARY- Laptop driver issues (Michal Wellum)
5. Oracle 7.3.4 and/or Solaris 2.4 (Andre R. Kruger)
6. scripting question (dakotak1d@netscape.net)
7. looking for air conditioner websites (Karl.Rossing@Federated.CA)
8. slow xauth (Clift Robert T CONT DLVA)
9. problem add device (jimi beyylorn)
10. problem add device (jimi beyylorn)
11. .clustertoc file (James Zhao)
12. problem device again (jimi beyylorn)
13. SUMMARY: 120GB IDE HDDs in a SunFire V100 (Timothy Lorenc)
14. try ws_open_inet_client_socket - connect: Connection refused
(Paf7172@aol.com)
15. SUMMARY: scripting question (dakotak1d@netscape.net)
16. CDE startup problem (John Heiden)
17. Does Adminsuite on Solaris 2.8 have a "Host Manager" component?
(Dave Martini)
18. SUMMARY: "can't set locale" error (Dave Martini)
19. jumpstart problem (after tftp stage) (Alex)
--__--__--
Message: 1
Date: 5 Sep 2002 16:11:52 -0000
From: "sridhara pk" <sridharapk@rediffmail.com>
Reply-To: "sridhara pk" <sridharapk@rediffmail.com>
To: sunmanagers@sunmanagers.org
Subject: SUMMARY:ksh
Hi
sorry for the trouble caused i just forgot to export the ENV
variable in the .profile
Thanks for those who replied to my mail
Sridhara
--__--__--
Message: 2
Reply-To: "Eugene Kushnirskiy" <admin@netbiz1.com>
From: "Eugene Kushnirskiy" <admin@netbiz1.com>
To: <sunmanagers@sunmanagers.org>
Subject: Installing Solaris 9 on RAID 5
Date: Thu, 5 Sep 2002 12:14:31 -0400
Hello,
I have an Ultra 2 machine, which has 3 9.1GB hard drives connected to
it. I
am trying to create a RAID 5 volume out of the 3 disks and then install
Solaris 9 on it.
I initially thought it was possible to install Solaris on the first disk
and
then convert it into a RAID 5 volume using Solaris Volume Manager.
However, a
Solaris Volume Manager Administration Guide states: "Do not create a
RAID 5
volume from a component that contains an existing file system. Doing so
will
erase the data during the RAID 5 initialization process", so creating a
RAID 5
volume after the OS is installed is not an option.
I was wondering if there is any other way to implement a Solaris
installation
on a RAID 5 volume.
Regards,
Eugene
--__--__--
Message: 3
Date: 5 Sep 2002 16:23:59 -0000
From: "sridhara pk" <sridharapk@rediffmail.com>
Reply-To: "sridhara pk" <sridharapk@rediffmail.com>
To: sunmanagers@sunmanagers.org
Subject: CMSynergy on solaris 8 client connectivity problem
Hi managers
I have a CMSynergy configuration management tool database running
on a V880 Sunfire server
I am unable to connect from the solaris client to the server where
as i can connect from a windows client
I have setup the engine name and the error is unable to connect to
the database path specified
Is there anything i need to configure on the client like a temp
database for the transactions
Any solution is highly appreciated
Regards
Sridhara
--__--__--
Message: 4
From: Michal Wellum <mike.wellum@linmor.com>
To: "'sunmanagers@sunmanagers.org'" <sunmanagers@sunmanagers.org>
Subject: SUMMARY- Laptop driver issues
Date: Thu, 5 Sep 2002 12:47:15 -0400
Thanx for all the responses. I should have been more specific in saying
that
the laptop is a natureteck 747s SPARC processor laptop. the problems
turned
out to be the mach64 drivers from the solaris 8 cd didn't get installed,
and
after they were installed it turned out that it was actually missing 3
drivers, the SUNWm64.us, the drivers for X for the card and the loadable
module drivers for the card.
After everything was thrown in, the machine was rebooted and the xserver
started without problems.
Again. Thanx for the assistance.
Michal Wellum
IS/IT/Systems Analyst "Oh look! Murphy is fighting
Linmor Technologies with Ockham again..."
(613)727-2757 x283
--__--__--
Message: 5
Subject: Oracle 7.3.4 and/or Solaris 2.4
From: "Andre R. Kruger" <akruger@etilize.com>
To: sunmanagers@sunmanagers.org
Date: 05 Sep 2002 10:17:07 -0700
I am in desperate need of Oracle 7.3.4 for sparc media and Solaris 2.4
for sparc media if anyone on the list could help me out it would be
greatly appreciated ....
-- Andre R. Kruger Vice President of Information Technology etilize Inc. mailto:akruger@etilize.com (310) 767 4001 voice Suite 100, 1411 West 190th Street (310) 767 1548 fax Gardena, CA. 90248 ******************************************************************* * `Oh Tiber! father Tiber! To whom the Romans pray, * A Roman's life, a Roman's arms, take thou in charge this day!' * So he spake and, speaking, sheathed the good sword by his side, * And, with his harness on his back, plunged headlong in the tide. * Horatius - by Thomas Babbington, Lord Macaulay ******************************************************************* --__--__-- Message: 6 Date: Thu, 05 Sep 2002 14:12:15 -0400 From: dakotak1d@netscape.net To: sunmanagers@sunmanagers.org Subject: scripting question Gurus, This ones' a bit off topic, but I'm sure an easy one for some of you sed/awk heads.....I have have these files that have one username per line, i.e. user1, user2, user3, How can I get these lines concatenated onto the same line so this file contents would look like: user1,user2,user3 I've tried using sed to strip out the return ascii return code /15 (by generating a ^M in the sed script with vi) but that doesn't seem to get them 'together'. TIA Dakota __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ --__--__-- Message: 7 To: <sunmanagers@sunmanagers.org> Subject: looking for air conditioner websites From: Karl.Rossing@Federated.CA Date: Thu, 5 Sep 2002 13:30:00 -0500 Hi, We have about 20 servers in our server room(We are a small company). Our server room air-conditioner is no longer cutting it. Servers don't like heat and our Sun servers put out alot of heat. I'm wondering if there are any websites or if you have any suggestions about AC sizing? --__--__-- Message: 8 From: Clift Robert T CONT DLVA <CliftRT@NSWC.NAVY.MIL> To: "'sunmanagers@sunmanagers.org'" <sunmanagers@sunmanagers.org> Subject: slow xauth Date: Thu, 5 Sep 2002 14:49:42 -0400 All, We currently have a boot server that assigns display numbers such as "system:6.0" to each system that boots. Once the user telnets to another system we set the display using xauth as follows: DISPLAY=`/usr/bin/X11/xauth -i list | head -1 | cut -f1 -d" " `.0 which sets the DISPLAY to system:6.0. The problem is that is takes between 15 and 40 seconds for xauth to read the .Xauthority file and assign the display. Does anyone know of a faster process? Tom Clift FTI - K55 540-653-8023 --__--__-- Message: 9 Date: Thu, 5 Sep 2002 12:15:16 -0700 (PDT) From: jimi beyylorn <jimbeyyl@yahoo.com> Subject: problem add device To: sunmanagers@sunmanagers.org Cc: jimbeyyl@yahoo.com hi, i tried add a mass storage to sunblade 1000 (with solaris 8 ) when i enter command probe-scsi-all in ok mode system recognize mass storage, but in solaris address mass storage not exist in /dev/[r]dsk or /devices or command format. i want format this mass storage but when i enter command format solaris not display address mass storage.only display c0 for hard disk . please help me for add mass storage in solaris. thanks.... Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com --__--__-- Message: 10 Date: Thu, 5 Sep 2002 12:36:23 -0700 (PDT) From: jimi beyylorn <jimbeyyl@yahoo.com> Subject: problem add device To: sunmanagers@sunmanagers.org Cc: jimbeyyl@yahoo.com hi, i tried add a mass storage to sunblade 1000 (with solaris 8) in ok mode when i enter command probe-scsi-all system recognize mass storage. but in solaris mass storage address not exist in /dev/[r]dsk or /devices or format command. when ,i enter format command solaris display only address hard disk in c0. and not display address mass storage . please help me. thanks Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com --__--__-- Message: 11 Date: Thu, 05 Sep 2002 15:49:00 -0400 From: James Zhao <james@bdc.cv.net> Subject: .clustertoc file To: sunmanagers@sunmanagers.org All, solaris 8 02/02 release, the .clustertoc file has 49 packages in the SUNWCreq cluster, but after install using jumpstart ( SUNWCreq cluster selected and there are no package add or delete in the profile ), it actually has 81 packages installed. Is .clustertoc file actually being used? Thanks. James Zhao Email: james@bdc.cv.net --__--__-- Message: 12 Date: Thu, 5 Sep 2002 13:17:43 -0700 (PDT) From: jimi beyylorn <jimbeyyl@yahoo.com> Subject: problem device again To: sunmanagers@sunmanagers.org Cc: jimbeyyl@yahoo.com hi, thanks to all replays, but boot -r and #devfsadm is not work. i have this problem yet. please help me thanks Yahoo! Finance - Get real-time stock quotes http://finance.yahoo.com --__--__-- Message: 13 Reply-To: <tim@load.com> From: "Timothy Lorenc" <tim@load.com> To: "Sun Managers - Mailing List (E-mail)" <sunmanagers@sunmanagers.org> Subject: SUMMARY: 120GB IDE HDDs in a SunFire V100 Date: Thu, 5 Sep 2002 15:23:25 -0500 SUMMARY: I successfully installed two Western Digital 120GB HDDs in a SunFire V100. P/N: WD1200JB-00CRA1 NOTE for jumper settings: I had to set the boot drive c0t0d0 to Cable Select. And the second drive chained with the CD-ROM drive was set to Master. Hope this information helps someone else out there. -- ORIGINAL question below: I only found a single question about 129GB IDE HDDs with no summary in the archives. So I am going to ask: Is it possible to use 120GB IDE HDDs in a SunFire V100. And if so, which brand(s) or model(s) have you used. Thanks. -- LOAD your email! Timothy Lorenc USmail: Lorenc Advantage, Inc. Consultant 6732 E. State Blvd. PMB 304 Email: tim@load.com Fort Wayne, IN 46815 http://www.load.com ***DISCLAIMER*** If this communication concerns the negotiation of a contract or agreement, the Uniform Electronic Transaction Act does not apply to this communication: contract and/or agreement formation in this matter shall only occur with manually-affixed signatures on original documents. --__--__-- Message: 14 From: Paf7172@aol.com Date: Thu, 5 Sep 2002 16:30:32 EDT Subject: try ws_open_inet_client_socket - connect: Connection refused To: sunmanagers@sunmanagers.org, users@httpd.apache.org I am getting the subj error on my Apache server running on Solaris 8. I have found this at sunmangers: ndd -set /dev/tcp tcp_conn_req_max_q 1024. this doesn't help. i am getting the errors even more frequent. I have also tweaked httpd.conf as per Tuning Your Apache Web Server on Suns Dot-Com builder site. The env is: Apache webserver connecting to a WebSphere Application Server on Solaris 8 also that is running the servlet engine for all of our applications. I can give more info out if need be. What are the different settings for ndd -set /dev/tcp tcp_conn_req_max_q 1024 that I can test out? Should I tweak any other params? All help would greatly be appreciated. Thanks, Paul --__--__-- Message: 15 Date: Thu, 05 Sep 2002 17:01:28 -0400 From: dakotak1d@netscape.net To: sunmanagers@sunmanagers.org Subject: SUMMARY: scripting question Thanks once again, this list is amazing.....there were several eloquent ways to do this, these were the 'simple is best' solutions: esaddler@cccis.com cat filename | tr -d "\012" "Jeremy Jin" <jin@gedco.com> echo `cat yourfile` "John Elser" <jElser@ck8.uscourts.gov> cat filename | awk ' {printf }' "TRUCKS, JESSE (AIT)" <jt9873@sbc.com> provided 2 correct ways: awk '{printf("%s"),$1}' filename AND (for ksh): for USERID in $(cat filename); do echo "${USERID}\c"; done Fabrice Guerini <fabrice@life.net> perl -ne 's/\s*\n//; print;' filename Gordon Baldwin <gordon.baldwin@gettyimages.com>, Joshua Beining <JBeining@eline.com> & Dan.Burton@trilogy.com These gents all provided similiar a simple perl construct: #! /usr/bin/perl while(<>) { chomp; print; } Thanks also to: Rafael Angarita <rangarita@telcel.net.ve> "Urie, Todd" <TUrie@trueposition.com> "Bryan J. Smith" <b.j.smith@ieee.org> "Matthew R. MacIntyre" <matthew.macintyre@ottawa.ca> "Lee, Elizabeth" <elizabeth.lee.contractor@fnmoc.navy.mil> Hope I didn't miss anyone.....here was original post: > Gurus, > This ones' a bit off topic, but I'm sure an easy one for some > of you sed/awk heads.....I have have these files that have > one username per line, i.e. > > user1, > user2, > user3, > > How can I get these lines concatenated onto the same line so > this file contents would look like: > > user1,user2,user3 __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ --__--__-- Message: 16 Date: Thu, 05 Sep 2002 17:39:40 -0400 From: John Heiden <jheiden2@pop3.utoledo.edu> Subject: CDE startup problem To: sunmanagers <sunmanagers@sunmanagers.org> Dear Friends, I have never posted to this list before, but I have been reading it a little while now. Hopefully you will pardon my lack of knowledge, but I have a problem, which I think probably has been seen before, or somebody might be able to help me with. I very much appreciate any time you might be able to help with, I know your time is valuable. Let's see, recently upon a rare reboot, I found that my SUN E-250 server would not start up X/CDE upon reboot. I need to figure out why, so I can fix it. It is a production server, and I can't have it not come back up while I'm out of town, for example. So I did a little bit of looking. Inside of the file /.dt/errorlog.old I find the following statements: Workspace Manager: I/O error on display:: :0.0 dtsession: Connection to server lost - exiting. First, is this the error message I don't see upon reboot? Second, if this is why, how can I find out why I get this? Thank you much for your kind assistance. John John Heiden Network Engineer The University of Toledo Toledo, OH 43606 jheiden2@pop3.utoledo.edu --__--__-- Message: 17 Date: Thu, 5 Sep 2002 15:01:31 -0700 (PDT) From: Dave Martini <martini@mrpeabody.llnl.gov> To: sunmanagers@sunmanagers.org Subject: Does Adminsuite on Solaris 2.8 have a "Host Manager" component? I upgraded my NIS+ server from 2.6 to 2.6. In 2.6 I used to use solstice to manage my user accounts and hosts etc. In 2.8 I use Adminsuite to do this however there is no option within Adminsuite for "hosts" or "hosts manager" like there was in solstice to add hosts. What is the equivalent to Solstice Host Manager on Solaris 2.8? Thanks Much. David Martini LLNL --__--__-- Message: 18 Date: Thu, 5 Sep 2002 15:06:10 -0700 (PDT) From: Dave Martini <martini@mrpeabody.llnl.gov> To: sunmanagers@sunmanagers.org Subject: SUMMARY: "can't set locale" error People suggested checking the /etc/default/init file for the TZ entry. Also it was suggested I check the /etc/TIMEZONE file for the same TZ entry. This was the fix for my situation. David Martini LLNL --__--__-- Message: 19 Date: Thu, 5 Sep 2002 15:55:52 -0700 From: Alex <ded_subs@tumko.org> To: sunmanagers@sunmanagers.org Subject: jumpstart problem (after tftp stage) Gurus, I am having problems with jumpstarting one Ultra AX-MP. The jumpstart server configuration has not been changed for a long time, and before this time I have never had problems with jumpstarting other AXMPs.. The box is coming up, loading TFTP image, and hanging right after that: UltraAX-MP WorkServer (2 X UltraSPARC-II 400MHz), No Keyboard OpenBoot 3.10.7 ME, 1024 MB memory installed, Serial #10429456. Ethernet address 8:0:20:9f:24:10, Host ID: 809f2410. Boot device: disk File and args: {0} ok boot net - install Boot device: /pci@1f,4000/network@1,1 File and args: - install 2aa00 "2aa00" is the last message from the box.. Then it has to be power-cycled, break does not work to get to OpenBoot PROM.. >From the jumpstart server we can see that the last packet that the box is sending is a confirmation that the image was successfully loaded via TFTP: ... js-srv -> new-srv TFTP Data block 310 (368 bytes) (last block) new-srv -> js-srv TFTP Ack block 310 There is no conflict in IPs, MAC-addresses, switch port is set to 100Full. The openboot prom version is the same as on other AXMP boxes that have been successfully jumpstarted (3.10.7). Any ideas why it fails would be highly appreciated! Alex --__--__-- _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers End of sunmanagers Digest _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:53 EDT