bad obp ?

From: Steve Mickeler (steve@neptune.ca)
Date: Wed Sep 04 2002 - 16:46:25 EDT


host = E420R

Notice the screwed up spellings of some of the variables when running a
printenv ( be sure to check out boot-device ) as well as the lack of scsi
but via show-devs.

I have a support call open with sun since this box is still under
warrantly.

{1} ok printenv
Variable Name Value Default Value

scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode )& ,(,n,!,- 9600,8,n,1,-
ttya-mode )& ,(,n,!,- 9600,8,n,1,-
pcia-probe-list ! 1
pcib-probe-list !,#,",$,% 1,3,2,4,5
enclosure-type %$ -$!!%
banner-name Cen
energystar-enabled? false
mfg-mode off off
diag-level min min
#power-cycles 526351
system-board-serial# % !%!&( #!)&'
system-board-date #)$'aa&!
fcode-debug? false false
output-device ccbeen screen
input-device keiboabd keyboard
load-base 16384 16384
boot-command bood boot
auto-boot? true true
watchdog-reboot? false false
diag-file
diag-device ned net
boot-file
boot-device dick ned disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 64 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc
security-mode none
security-password
security-#badlogins 0
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
hardware-revision
last-hardware-update
diag-switch?

{1} ok show-devs
/SUNW,UltraSPARC-II@2,0
/SUNW,UltraSPARC-II@1,0
/counter-timer@1f,1c00
/pci@1f,2000
/pci@1f,4000
/virtual-memory
/memory@0,0
/aliases
/options
/openprom
/chosen
/packages
/pci@1f,4000/ebus@1
/pci@1f,4000/ebus@1/flashprom@10,0
/pci@1f,4000/ebus@1/eeprom@14,0
/pci@1f,4000/ebus@1/fdthree@14,3023f0
/pci@1f,4000/ebus@1/ecpp@14,3043bc
/pci@1f,4000/ebus@1/su@14,3062f8
/pci@1f,4000/ebus@1/su@14,3083f8
/pci@1f,4000/ebus@1/se@14,400000
/pci@1f,4000/ebus@1/sc@14,500000
/pci@1f,4000/ebus@1/SUNW,pll@14,504000
/pci@1f,4000/ebus@1/power@14,724000
/pci@1f,4000/ebus@1/auxio@14,726000
/openprom/client-services
/packages/sun-keyboard
/packages/SUNW,builtin-drivers
/packages/disk-label
/packages/obp-tftp
/packages/deblocker
/packages/terminal-emulator

{1} ok
Hardware Power ON
CPU Offline (not present)
Master CPU : 0000.0001.0055.11a0
Slave CPU : 0000.0002.0055.11a0
CPU Offline (not present)
Master E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000

Button Power ON
CPU Offline (not present)
Master CPU : 0000.0001.0055.11a0
Slave CPU : 0000.0002.0055.11a0
CPU Offline (not present)
Master E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000

Probing keyboard Done
Executing Power On SelfTest
1>
1>@(#) Sun Ultra 80(UltraSPARC-II 4-way) UPA/PCI POST 1.2.7 05/24/1999
05:33 PM
1>INFO: Processor 1 is master. CPU 450 MHz. 6792KB Ecache.
1>
1> <00> Init System BSS
1>STATUS =FAILED
1>TEST = Unexpected event occurred - Trap
1> tl tt tstate tpc tnpc
1> 01 30 00000044.80001605 ffffffff.f008689c ffffffff.f00868a0
1> DMMU SFSR 00000000.0080100b
1> DMMU SFAR 00000000.00000000
1> (FV) Fault Valid Bit Set
1> (OW) Overwrite Bit Set
1> (ASI) 0x80
1> (FT) VA out of range IDMMU
1> (CT) Context 0
1> (PR) Privilege Bit Set
1> IMMU SFSR 00000000.0080100b
1> (FV) Fault Valid Bit Set
1> (ASI) 0xdf
1> (FT) VA out of range IDMMU
1> (CT) Context 2
1> (PR) Privilege Bit Set
1> AFSR 00000001.bde6e0ba
1> AFAR 000000d7.bdc5c0f0
1> (ME) Multiple Errors
1> (PRIV) Privileged Code
1> (ETP) Ecache Tag Parity Error, (ETS) Syndrome = 6
1> (IVUE) UE on Interrupt Data Packet
1> (TO) Time Out Error
1> (BERR) Bus Error
1> (CP) Copy out Parity Error
1> (WP) Ecache Parity Error on Writeback
1> (EDP) Ecache Parity Error
1> (UE) Uncorrectable ECC Error
1> (P_SYND) Ecache Parity Syndrome = e0ba
1> SDBH = 00000000.00000000 SDBL = 00000000.00000000
1>TT(0x30) Data Acc Exception Error

Power On Selftest Completed
~ Status = 0000.0000.0000.0001 ffff.ffff.f00b.d700 ff9f.ffff.1bd1.1111
Software Power ON
CPU Offline (not present)
Master CPU : 0000.0001.0055.11a0
Slave CPU : 0000.0002.0055.11a0
CPU Offline (not present)
Master E$ : 0000.0000.0040.0000
Slave E$ : 0000.0000.0040.0000

@(#) UPA/PCI 3.23 Version 0 created 1999/06/30 13:53
Clearing DTAGS Done
Probing Memory
CONFIG = 0000.0000.0000.0010
MEM BASE = 0000.0000.0000.0000
MEM SIZE = 0000.0000.4000.0000
MMUs ON
Copy Done
PC = 0000.01ff.f000.2a50
PC = 0000.0000.0000.2a94
Decompressing into Memory Done
Size = 0000.0000.0006.ef90
ttya initialized
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0 256 256 256 256 : 1 Gigabytes
Probing Memory Bank #1 0 0 0 0 : 0 Megabytes
Probing Memory Bank #2 0 0 0 0 : 0 Megabytes
Probing Memory Bank #3 0 0 0 0 : 0 Megabytes
Probing Floppy: No drives detected
Probing EBUS Nothing there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device ! This slot excluded from probing...
Probing /pci@1f,4000 at Device # This slot excluded from probing...
Probing /pci@1f,4000 at Device " This slot excluded from probing...
Probing /pci@1f,4000 at Device $ This slot excluded from probing...
Probing /pci@1f,4000 at Device % This slot excluded from probing...
Probing /pci@1f,2000 at Device ! This slot excluded from probing...
Bad baud rate: )&
Bad baud rate: )&
ccbeen not found.
keiboabd not found.
SC Control: EWP:0 IAP:0 FATAL:0 WAKEUP:0 BXIR:0 BPOR:0 SXIR:0 SPOR:1 POR:0
Probing Memory Bank #0 256 256 256 256 : 1 Gigabytes
Probing Memory Bank #1 0 0 0 0 : 0 Megabytes
Probing Memory Bank #2 0 0 0 0 : 0 Megabytes
Probing Memory Bank #3 0 0 0 0 : 0 Megabytes
Probing Floppy: No drives detected
Probing EBUS Nothing there
Probing UPA Slot at 1e,0 Nothing there
Probing UPA Slot at 1d,0 Nothing there
Probing /pci@1f,4000 at Device ! This slot excluded from probing...
Probing /pci@1f,4000 at Device # This slot excluded from probing...
Probing /pci@1f,4000 at Device " This slot excluded from probing...
Probing /pci@1f,4000 at Device $ This slot excluded from probing...
Probing /pci@1f,4000 at Device % This slot excluded from probing...
Probing /pci@1f,2000 at Device ! This slot excluded from probing...
Bad baud rate: )&
Bad baud rate: )&

Cen (2 X UltraSPARC-II 450MHz), No Keyboard
OpenBoot 3.23, 1024 MB memory installed, Serial #12715885.
Ethernet address 8:0:20:c2:7:6d, Host ID: 80c2076d.

Power On Self Test Failed. Cause: TT(0x30) Data Acc Exception Error

[-] Steve Mickeler [ steve@neptune.ca ]

[|] Todays root password is brought to you by /dev/random

[+] 1024D/9AA80CDF = 4103 9E35 2713 D432 924F 3C2E A7B9 A0FE 9AA8 0CDF
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:53 EDT