From: Very Pinguin (dt1649651@yahoo.com)
Date: Mon Aug 26 2002 - 23:38:11 EDT
First of all, I would like to say thanks to :
Hichael Morton,
Michael Connolly
Phillip Miller,
LTiu
I built another Ultra 5 with Solaris 8 10-2001, then
installed the SunPCI software 1.3. The pkgadd ends
with a "succesfully" .And it works, at least I could
be able to create a C drive for Dos.
The following is part of the output of prtconf -D that
show the existence of the 400Mhz SunPCI card.
pci, instance #1 (driver name: simba)
pci108e,5043, instance #0 (driver name:
sunpcidrv)
Then, perhaps the SUNPci software 1.3 has some
conflicted things with Solaris 9 ?
Anyway, thanks again to everybody.
DT
---------------------------------------
The original question :
Hi all,
I just installed a SUNPCI 400Mhz on Ultra 5 with
Solaris 9.
Looking at Sun site, I installed the SunPci software
1.3.
I have two questions:
1. How do I know if OBP recognizes the SUNPCI card ?
( I 've had touch /reconfigure and reboot )
2. When adding the package SUNWspci, I get the
following error:
[...]
/opt/SUNWspci/tables/keytables/dos_kb_us
[ verifying class <none> ]
## Executing postinstall script.
Warning: /etc/devlink.tab not updated correctly
Perhaps the system OBP needs to be updated
Can not open the SunPCi device
The device driver is not installed.
pkgadd: ERROR: postinstall script did not complete
successfully
Installation of <SUNWspci> partially failed.
I tried the software 2.3.1 and got similar error.
Please give me some advice,
Thanks,
DT
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:50 EDT