From: Craig Raskin (raskin@compusec.org)
Date: Fri Aug 23 2002 - 15:21:58 EDT
I am having problems trying to get a 220R to boot. The machine had a bad
CPU (there is only a single CPU in the box) and we got a new one in to
replace it. After replacing it, when trying to boot up the machine, it
will not boot.
The machine appears to boot properly, power supply shows DC status green,
AC present green, and the fault unlit. Both lights are on for the two
internal drives as well as the power light is on and the status panel
fault light is off.
...but I can't get any output on the console plugged into serial A. I
tried booting with a keyboard attached. I held down stop-d during the
power-on to try to get it to run a self-check. The keyboard LEDs blink on
powerup and then nothing. According to Sun's docs, this indicates a NVRAM
failure. Is there anything else I can check to verify that this is what
is causing it?
I have tried booting the machine with the new CPU and also with no CPUs
and the same things happens.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:50 EDT