From: Rama Boggarapu (rama@responsivebusiness.com)
Date: Tue Aug 13 2002 - 15:56:26 EDT
I am new to the Sun environment. I have a used Ultra 10 and
added a 2nd hard drive (60 G - Western Digital). My system
recognizes the 2nd hard drive but when I tried to format, I
get a message indicating the format program has to be
obtained from the manufacturer. Also, I did not buy any
additional IDE cables. I used the existing cable attached to
the 1st drive (in the rear). One end of the cable attached to
the Motherboard, the middle of the cable attached to the rear
hard drive and the other end (marked as 'Slave') to the new
2nd hard drive (front). I used to CS on both drives. I also
have floppy drive and CDROM and did not touch these.
Do you have any advice to solve this problem?
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:46 EDT