From: Perttunen, Bruce (BPerttunen@bcbsm.com)
Date: Fri Aug 02 2002 - 16:17:38 EDT
I created a FlashArchive of a Netra T1 which has c1t0 as it's boot disk and
uses c1t0 in /etc/vfstab. Whenever I push this archive out to another Netra
which has c0t0 as it's boot disk, the /etc/vfstab always references c1t0 and
as a result, the server won't boot. In the profile, I used "partitioning
explicit" and set the filesystems similar to "filesys rootdisk:s0". This
setup creates the filesystems on c0t0, but the vfstab still says c1t0. I
know that I can correct this with a Finish script, but does anyone know why
this is happening?
Thanks in advance.
Bruce Perttunen
Blue Cross Blue Shield of Michigan
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:42 EDT