From: Alex Ranchoux (aranchoux@yahoo.com)
Date: Fri Aug 02 2002 - 06:55:13 EDT
Hi all,
I have been asked to install SMC3.0 on a SUNFIRE 280r
and review the functionality before purchasing a
Licence for the advanced monitoring modules.
I have read the obvious release-notes.pdf,
install-guide.pdf and INSTALL-README before proceeding
with the installation.
I decided to install all 3 pkgs onto the same server
in /opt (plenty of space) as recommanded.
-Server
-Agent
-Console
The install of pkgs went fine.(CD1) Afterwards, you
was prompted to insert the second cd to install a
whole lot of Add-ons pkgs for A5x00, Netras,
starfires....
I chose NOT to. (no licence) I only want to test the
basic functionality of SMC3.0.
I then proceeded to run setup...there goes below the
problem i ran into..very obscure.
Has anyone had to install SMC3.0 on Solaris 8?
Extract:
"Do you want to run setup now? [y|n|q] y
-----------------------------------
Sun Management Center Setup Program
-----------------------------------
This program does setup of Sun Management Center
components that are installed on your system.
Checking for Sun Management Center components
installed on your system.
You have the following Sun Management Center
components installed
Sun Management Center Server
Sun Management Center Agent
Sun Management Center Console
Configuring the system for setup, please wait.
This part of setup generates security keys used for
communications
between processes. A seed must be provided to
initialize the
keys. You can choose to use the standard Sun
Management Center default or
enter your own seed. If you do not generate the keys
now,
you can do so later using the procedure documented in
the
Sun Management Center 3.0 Users Guide.
Do you want to generate these keys using the Sun
Management Center default seed? [y|n|q] n
Please make sure you use the same seed for all the
machines you install.
What seed would you like to use?
The Sun Management Center base URL is relative to the
Sun Management Center Console.
The Sun Management Center Console is able to request
help documentation via the network.
If you have installed Sun Management Center help
documentation in an http-accessible
location within your network, you may specify this
location.
If Sun Management Center help is installed on the
console host, simply accept the default value.
Please enter base URL to Sun Management Center help
[local]:
The base URL has been set to
file:/opt/SUNWsymon/lib/locale
Do you want to setup Sun Fire (6800/4810/4800/3800)
platform administration module [y|n|q] n
Please read the release notes to configure the device
type.
execution of svrmgrl using /tmp/db-start.sql fail
exiting........................
sqlerror code = 27102
sqlerrmsg full = ORA-27102: out of memory
Database setup failed : db-start failed
Log file:
/var/opt/SUNWsymon/install/install.020802124255.28751
End of Installation
Has anyone come accross this before? Any tips/tricks
welcomed.
I removed all pkgs with es-uninst a few times
again..no joy though:)
Any help will be greatly appreciated,
Alex Ranchoux
Unix systems Eng
Laverock Von Schoultz
Yahoo! Health - Feel better, live better
http://health.yahoo.com
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:42 EDT