From: Graham Wood (rauxon@dragonhold.org)
Date: Tue Jul 30 2002 - 09:29:36 EDT
On Tue, 30 Jul 2002, Graham Wood wrote:
> Short of taking the top off, is there any way to tell what memory is in which
> slots?
>
> prtdiag just tells me the total, and I don't remember seeing it during boot
> either (not that I can reboot the machine at this point)...
>
> Will summarise, of course :)
Next I need to engage brain/eyes/etc.
Apparently the answer is 'memconf' from sunfreeware (amongst other places),
and this was discussed recently.....
*blushes*
Apologies all, I'm on the list so must have missed it :/
Graham
PS. Thanks again to all the quick answers :)
-- Whomever goes to fight monsters should take care not to become a monster himself. And when you stare too long into the abyss, the abyss stares back into you. -Frederick Nietzsche _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:40 EDT