From: Kwan, William (wkwan@grow.net)
Date: Mon Jul 29 2002 - 20:59:35 EDT
Hi all,
The previous SA setup a cheap console server hook up to Sun and Cisco
devices. This is a touble left for me to fix. For the quick questions, I
need to find out
- what type of adaptor should be used on E220R
(I know it is different from X1,T1...etc)
- what is the pin layout on a DB25 for DCE and DTE
- what type of connection should be used on Cisco PIX/switch
I am not sure if these are the right question. I remember the SA said the
card came with DB25 female connectors. He bought some DB25-RJ45 adaptors.
He then did some wiring in the adaptor for a DCE-DTE switch (I don't know
which one) so that he can use straight through cables instead of
crossover/rollover cables to hook up to the devices.
So.. there's a mystery and some clues. Is there any good detectives here?
Thanks
William
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:40 EDT