How to deal with: "Failed to add quorum device

From: sunmanagers.comverse@9ox.net
Date: Tue Apr 08 2008 - 03:11:11 EDT

Next message: sunhux G: "Summary: Other forums/lists Unix & tools/storage"
Previous message: sunmanagers.comverse@9ox.net: "How to deal with: "Failed to add quorum device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,

I'm trying to finish installation of Sun Solaris 3.2 on two
Sun-Fire-V240s (HBAs are QLogic QLA2342) over SPARC Solaris 10.

When I get to the stage of adding a quorum disk to Sun Cluster 3.2:

# scconf -a -q globaldev=d24

the following error is received:

scconf: Failed to add quorum device (d24) - unable to scrub the device.

I ran the commands:

# scdidadm -r
# scdidadm -i
# scdidadm -L

Where the d24 is as follows:

        # scdidadm -L
        ...
        24 SRV-00-003:/dev/rdsk/c5t128d41 /dev/did/rdsk/d24
        24 SRV-00-049:/dev/rdsk/c5t128d41 /dev/did/rdsk/d24

# ls -ls /dev/did/rdsk/d24
2 lrwxrwxrwx 2 root root 42 Apr 7 13:40
/dev/did/rdsk/d24 -> ../../../devices/pseudo/did@24:24,24s7,raw
<mailto:../../../devices/pseudo/did@24:24,24s7,raw>

Format describes the disk as:

        Current Disk = c5t128d40
        <StoreAge-rbarak_vol40_clu-#12 cyl 98 alt 2 hd 4 sec 512>
        /pseudo/vhba@0/vsd@80,28

I Googled the net, and beside references to disks bigger than 1 GB, I
couldn't find any relevant suggestions.

Anyone has any experience with this "unable to scrub the device" error ?

Thanks,
Ron.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Next message: sunhux G: "Summary: Other forums/lists Unix & tools/storage"
Previous message: sunmanagers.comverse@9ox.net: "How to deal with: "Failed to add quorum device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:55 EDT