From: Matthew Taylor (matthew.taylor@montgomerycollege.edu)
Date: Wed Apr 02 2008 - 16:43:12 EST
Apologies if my search-fu failed me and the answer is out there.
I have a box with 1 hme and 8 qfe interfaces. I would normally used
exclusive IP zones, but that is not possible with these non-gldv3 driven
interfaces, so I am forced to use shared IP zones.
hme0 is configured on the host with a 10.x.x.x address. This is the only IP
address to be used on the global zone.
Each shared-ip zone is to have two of the physical qfe addresses assigned to
it, in two different subnets, one public, one the same 10.x.x.x as in the
global.
I have searched, and can not find the answer to this question:
Do the qfe's all have to have to be plumbed and have an assigned IP address
in the global zone separate from the IP address assigned in the non-global
zone configuration?
-- Matthew Taylor Montgomery College Office of Information Technology 240.567.3100 matthew.taylor@montgomerycollege.edu _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:54 EDT