From: Dan Lorenzini (lorenzd@gcm.com)
Date: Tue Apr 01 2008 - 13:26:14 EST
Greetings,
I am trying to install patch 127580-05 on a T5120, which is the system
firmware flashprom upgrade for the T5120 & T5220. Unfortunately, the
instructions appear to have been written for a different system. Does
anyone know where I might find the correct set of instructions for this
patch?
I have used the sysfwdownload utility to download the firmware image
file contained in the patch, but the command listed in the README file
(flashupdate) has been replaced by the "load" command which has a
different syntax. I am using the serial console. I have tried a few
variants of "load" but nothing seems to work.
I have looked through various Sun documentation for the T5x20 machines
but cannot find anything specific enough to perform the upgrade.
Thanks.
Dan Lorenzini
RBS Greenwich Capital
********************************************************************
This e-mail is intended only for the addressee named above.
As this e-mail may contain confidential or privileged information,
if you are not the named addressee, you are not authorized
to retain, read, copy or disseminate this message or any part of
it.
********************************************************************
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:53 EDT