vxdump in Solaris 10 + VxVM/VxFS 5.0 (+MP1)

From: przemolicc@poczta.fm
Date: Thu Feb 21 2008 - 02:23:46 EST


Hi all,

We are using Solaris 10 + 5.0MP1. While trying to dump to tape we have:

bash-3.00# mt -f /dev/rmt/2 status
HP Ultrium LTO 3 tape drive:
   sense key(0x0)= No Additional Sense residual= 0 retries= 0
   file no= 1 block no= 0
bash-3.00# df -h /vxfs/sowa-romeo-vol
Filesystem size used avail capacity Mounted on
/dev/vx/dsk/sowa-romeo-dg/sowa-romeo-vol
                       200G 94G 100G 49% /vxfs/sowa-romeo-vol
bash-3.00# /usr/sbin/vxdump 0uf /dev/rmt/2cn
/dev/vx/dsk/sowa-romeo-dg/sowa-romeo-vol
vxfs vxdump: Date of this level 0 dump: Tue Feb 19 12:17:28 2008
vxfs vxdump: Date of last level 0 dump: the epoch
Dumping /dev/vx/rdsk/sowa-romeo-dg/sowa-romeo-vol (/vxfs/sowa-romeo-vol)
to /dev/rmt/2cn
vxfs vxdump: mapping (Pass I) [regular files]
vxfs vxdump: mapping (Pass II) [directories]
vxfs vxdump: estimated 196160902 blocks (95781.69MB) on 648.82 tape(s).
vxfs vxdump: dumping (Pass III) [directories]
vxfs vxdump: dumping (Pass IV) [regular files]
vxfs vxdump: Closing /dev/rmt/2cn
vxfs vxdump: Change Volumes: Mount volume #2
vxfs vxdump: Is the new volume mounted and ready to go? ("yes" or "no")

The tapes are ok because we were dumping successfully to the same set of
tapes until we installed 5.0(+MP1). During 4.1MP2 there were no such problems.
So the only one change is version of Veritas.
Did anybody has similar problems ?

Regards
przemol

--
http://przemol.blogspot.com/
-- 
http://przemol.blogspot.com/
----------------------------------------------------------------------
Masz ostatnia szanse !
Sprawdz >>> http://link.interia.pl/f1d02  
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers


This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:47 EDT