From: Whittemore, Dale (dale.whittemore@lmco.com)
Date: Mon Feb 18 2008 - 15:52:35 EST
I forgot to mention that we do have boot servers on the same subnets behind
the firewall.
Dale
-----Original Message-----
From: sunmanagers-bounces@sunmanagers.org
[mailto:sunmanagers-bounces@sunmanagers.org] On Behalf Of Whittemore, Dale
Sent: Monday, February 18, 2008 1:13 PM
To: sunmanagers@sunmanagers.org
Subject: Jumpstart through firewall
We are trying to jumpstart some v215's through a firewall and having no
success. When we enter the "boot net - install" command at the ok prompt,
all we get is "Requesting Internet Address for <MAC address of the v215>".
We know jumpstart works because we can put the v215's on a subnet outside of
the firewall and it works just fine. Our networking folks say the firewall
is wide open currently but will be closed down in the near future. Even
with it "wide open" we still get the requesting internet address message.
Has anyone else come across this and what was the solution, if there was
one.
Thanks
Dale Whittemore
Unix System Administrator, Sr.
Lockheed Martin Enterprise Services
[demime 1.01b removed an attachment of type application/x-pkcs7-signature
which had a name of smime.p7s]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
[demime 1.01b removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:47 EDT