From: SunAdmin (sunsysadmin@gmail.com)
Date: Tue Jan 29 2008 - 08:00:15 EST
Hello List,
I'm seeing an error on a Solaris 9 host with SFS 4.4.13 installed. The
HBA is a Qlogic QLA2462 attached to a Brocade switch and zoned to my
array. I get the below error the first time I add luns to a host and
use cfgadm to discover the luns. The odd thing is that the 2nd time I
issue the same command it succeeds with no error.
[root@hosteng01--->]cfgadm -c configure c4
cfgadm: Library error: failed to create device node: 500a09839627d919:
I/O error
failed to create device node: 500a09869627d919: I/O error
Operation partially successful. Some failures seen
When the cfgadm error occurs, I get the following in my messages
file....
/var/adm/messages
"Failed to create nodes for pwwn=500a09869627d919; error=5"
I'm seeing this behavior on several Solaris 9 hosts and on different
arrays. The only thing I found on Sunsolve that might explain the
error was related to NL port mode for FC tapes. Has anyone seen this
behavior and is there a work-around?
Thanks,
Vic
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:42 EDT