From: Oskar Pienkos (oskar_pienkos@sfu.ca)
Date: Thu Jan 17 2008 - 17:43:29 EST
Hello Admins!
I'm having problems setting the network on SP on my Sparc Blade 6300.
I configured the chassis's (SUN Blade 6000) CMM network with no
problems. Both IP addresses are on the same subnet.
-> version
CMM firmware 1.1.6
CMM firmware build number: 16671
CMM firmware date: Thu Mar 1 11:21:46 PST 2007
CMM filesystem version: 0.1.14
-> pwd
Current default target: /CH/BL0/SP
-> set /CH/BL0/SP/network pendingipaddress=192.168.201.145
Set 'pendingipaddress' to '192.168.201.145'
-> set /CH/BL0/SP/network pendingipgateway=192.168.201.254
Set 'pendingipgateway' to '192.168.201.254'
-> set /CH/BL0/SP/network pendingipnetmask=255.255.255.0
Set 'pendingipnetmask' to '255.255.255.0'
-> set /CH/BL0/SP/network pendingipdiscovery=static
Set 'pendingipdiscovery' to 'static'
-> set /CH/BL0/SP/network commitpending=true
Set 'commitpending' to 'true'
After a few seconds I checked the settings and the changes didn't go
through.
-> show /CH/BL0/SP/network
/CH/BL0/SP/network
Targets:
Properties:
type = Network Configuration
commitpending = (Cannot show property)
ipaddress = 10.0.1.29
ipdiscovery = dhcp
ipgateway = 0.78.94.96
ipnetmask = 255.0.0.0
macaddress = 00:14:4F:81:4A:E7
pendingipaddress = (none)
pendingipdiscovery = dhcp
pendingipgateway = 0.78.94.96
pendingipnetmask = 255.0.0.0
I tried it through CMM and serial console. Also I tried a hard reset of
the blade SP, but still no cheese.
Any ideas?
Thanks a bunch!
Oskar
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:41 EDT