From: rumbidzayi gadhula (rumbiles@yahoo.com)
Date: Tue Jan 08 2008 - 04:34:55 EST
hi Managers
I have a Sunfire 4800 running solaris 8 and connected to an STK D173 array, using Veritas for volume management. Due to some power problems the array failed to mount.
Veritas can no longer see the array but it is visible through the format command and the EZFibre software.
The drivers are installed (jnic146x).
What i have done so far is run
format -e
select disk. i get a prompt to labe l the disk.
When I try labelling the disk i get the following message.
[disk unformatted]
Disk not labeled. Label it now? y
Warning: error writing VTOC.
Hardware error during read
ASC: 0x84 ASCQ: 0x0
Warning: error reading backup label.
Hardware error during read
ASC: 0x84 ASCQ: 0x0
Warning: error reading backup label.
Hardware error during read
ASC: 0x84 ASCQ: 0x0
Warning: error reading backup label.
Hardware error during read
ASC: 0x84 ASCQ: 0x0
Warning: error reading backup label.
Hardware error during read
ASC: 0x84 ASCQ: 0x0
Warning: error reading backup label.
Warning: no backup labels
Write label failed
When i try format I get an error message.
llegal request during format
ASC: 0x24 ASCQ: 0x0
failed.
Can you please assist me ? i have searched for a solution on the internet and the suggested solutions (besides replacement, )have not worked for me
I will summarise.
TIA
---------------------------------
Looking for last minute shopping deals? Find them fast with Yahoo! Search.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:39 EDT