Connecting D1000 to SunFire 280R

From: Andreas Höschler (ahoesch@smartsoft.de)
Date: Sat Dec 22 2007 - 08:04:14 EST

• Next message: Andreas Höschler: "Summary: Connecting D1000 to SunFire 280R"
• Previous message: Hector De Jesus: "Running powerpath command "powermt set policy=co" shows Error: CLARiiON device(s) not found."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi all,

I have a SF 280R and a D1000. I noticed that both have a wide
SCSI-connector. Can I use the built-in SCSI connector of the 280 to
connect to the D1000 or do I need to install a HBA? What SCSI-cable do
I need to connect both machines? Is this a standard cable that I might
get at next corners pc shop or some special component only available
from Sun?

Thanks a lot!

Regards,

   Andreas
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Andreas Höschler: "Summary: Connecting D1000 to SunFire 280R"
• Previous message: Hector De Jesus: "Running powerpath command "powermt set policy=co" shows Error: CLARiiON device(s) not found."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:37 EDT