From: Randall Cruz (ercruzv@gmail.com)
Date: Tue Dec 18 2007 - 19:11:53 EST
Hi guys,
I have been trying to deploy SunRays 4.0 on Red Hat 4 Update 3 64 bits
without success.
My final result was that all my DTUs got the IP address, start to
download the firmware, and that's all.
Then all the DTU reboot it self and start over again and again and
again!!!!!. The only status that i got in the SunRays Screen is a 26D.
So I decided to try with Red Hat 4 Update 3 32 bits and the same result.
DTUs are waiting for graphical display and the same status a 26D.
Can somebody give any feed back how SunRays can work on Red Hat? Did
someone has the same issue?
My DTUs are SunRay 1, 100 and 150 just for lab purposes. Any tips with
this type of DTU on Linux??? On Solaris 10 deployment all DTUs work
perfect ?
I will appreciate any feed back because my options are over and I dont
know that else I can do!
Best Regards,
Randy
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:37 EDT