Configure zone on the same NIC

From: Stephanie C (stepchung@gmail.com)
Date: Wed Nov 28 2007 - 18:08:58 EST

• Next message: Paul Sell: "Sparc Enterprise T1000 Jumpstart"
• Previous message: Asiye Yiðit: "load-spreading for in-bound traffic witn IPMP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

Can I configure the non-global zone (zone1) IP address on the same global
zone NIC card? And how do I do that? My server has only one NIC card. Here
it shows with ifconfig -a:

lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        inet 127.0.0.1 netmask ff000000
lo0:1: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        zone zone1
        inet 127.0.0.1 netmask ff000000
eri0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 209.xx.xx.xx netmask ffffffe0 broadcast 209.xx.xx.xx
        ether 0:3:ba:xx:xx:xx

Thanks for your help.

Stephanie
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Paul Sell: "Sparc Enterprise T1000 Jumpstart"
• Previous message: Asiye Yiðit: "load-spreading for in-bound traffic witn IPMP"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:33 EDT