From: Nicole Skyrca (nskyrca@syr.edu)
Date: Mon Oct 22 2007 - 16:42:01 EDT
Hi,
I am trying to jumpstart a Sunblade 2000 with Solaris 10. The jumpstart
install server is on a different subnet than my sunblade, so I created a
boot server on the same subnet.
When I try "boot net -s", it hangs after the following lines:
Using RPC bootparams for network configuration information.
Attempting to configure interface eri0...
Configured interface eri0
/
At this point, I stop seeing traffic in snoop on my boot server, but I
never see anything in snoop on my install server. I have never done a
jumpstart where the boot and install server were different servers.
This is my /etc/bootparams file entry. Is this correct for a boot
server?
builder4.syr.edu
root=data-4:/export/os-cd/5.10-0606/Solaris_10/Tools/Boot \
install=ncwis03:/export/os-cd/5.10
install_config=ncwis03:/export/install/5.10 \
sysid_config=ncwis03:/export/install/5.10/sysidcfg-local/subnet4 \
boottype=:in rootopts=:rsize=32768 term=:sun
ns=data-4:nis(255.255.255.0)
Any suggestions?
Thanks,
Nicole
Nicole Skyrca
Information Technology Analyst
Syracuse University
207 Machinery Hall
Syracuse, New York 13244
315-443-5310
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:27 EDT