From: Alan Rubin (rubin@frell.org)
Date: Sat Oct 06 2007 - 01:52:14 EDT
We have a Solaris 9 server on a 280 with a Qlogic branded HBA hooked up
to a Hitachi SAN. Apparently, we are using the 3rd party Qlogic drivers
instead of cfgadm to configure the existing LUNs. We're planning on
having another LUN added this week. In the past, we've had to modify a
Qlogic kernel file in the /kernel/drv directory and reboot-reconfigure
the system. This is one of more important servers and it would be great
to not have to reboot and suffer an (controlled) outage. Is there a way
to do a dynamic add with the Qlogic branded configuration?
Regards,
Alan
______________________
*Alan Rubin*
IT Consultant
Email:rubin@frell.org
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:25 EDT