From: rmp dmd (rmp.dmd1229@gmail.com)
Date: Fri Oct 05 2007 - 13:23:30 EDT
Hello,
I've setup Disk Mirroring on a V125 on solaris 10 . All
slices seem to be mirrored with the exception of one.
when I try to mount, it gives the following error:
sanmiguel:# mount /dev/md/dsk/d6 /sanmiguel
mount: I/O error
mount: Cannot mount /dev/md/dsk/d6
or
sanmiguel:# mount /dev/md/rdsk/d6 /sanmiguel
mount: /dev/md/rdsk/d6 not a block device
IS there a way to correct this without destroying the work ive already
done? Any help you may be able to give is greatly appreciated. Here's the
metastat output
d6: Mirror
Submirror 0: d16
State: Okay
Submirror 1: d26
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 61361280 blocks (29 GB)
d16: Submirror of d6
State: Okay
Size: 61361280 blocks (29 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s6 0 No Okay Yes
d26: Submirror of d6
State: Okay
Size: 61361280 blocks (29 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t1d0s6 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t0d0 Yes id1,sd@SFUJITSU_MAW3073NCSUN72G_000706B0K7GA____DAN0P720K7GA
c1t1d0 Yes id1,sd@SFUJITSU_MAW3073NCSUN72G_000706B0K35A____DAN0P720K35A
- R
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:24 EDT