From: Gary Brett (gary.brett@fidessa.com)
Date: Fri Oct 05 2007 - 08:28:26 EDT
Hi Gurus
I wanted to know, In Solaris 8 & 10, how can I determine the bandwidth usage
of my 100mbs network ports. I know netstat -I gives me packet counts etc and I
can check for retransmissions etc, but is there any way of me determining a
percentage of bandwidth utilisation at any one time? , ie if someone is
transferring a massive file then I would expect to see 90%-100% usage but when
just broadcast, multicast traffic is on the line then I would expect to see a
bandwidth usage of under 10% etc etc. I am assuming there must be a way of
doing this ?
Any help on this would be greatly appreciated
Gary
*****************************************************************************
*****************************************************************************
**********************************
This message is intended only for the stated addressee(s) and may be
confidential. Access to this email by anyone else is unauthorised. Any
opinions expressed in this email do not necessarily reflect the opinions of
Fidessa. Any unauthorised disclosure, use or dissemination, either whole or in
part is prohibited. If you are not the intended recipient of this message,
please notify the sender immediately.
Fidessa plc - Registered office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3781700 VAT registration no. 688 9008 78
Fidessa group plc - Registered Office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3234176 VAT registration no. 688 9008 78
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:24 EDT