From: przemolicc@poczta.fm
Date: Tue Sep 25 2007 - 07:21:05 EDT
Hello,
We are trying to create metadb replicas on x2200 (the latest firmware
and Solaris 10 8/07 + patches installed). We have the following configuration:
bash-3.00# fdisk /dev/rdsk/c1d0p0
Total disk size is 60800 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
========= ====== ============ ===== === ====== ===
1 Diagnostic 0 6 7 0
2 Active Solaris2 7 60799 60793 100
SELECT ONE OF THE FOLLOWING:
1. Create a partition
2. Specify the active partition
3. Delete a partition
4. Change between Solaris and Solaris2 Partition IDs
5. Exit (update disk configuration and exit)
6. Cancel (exit without updating disk configuration)
Enter Selection: 6
bash-3.00# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1d0 <DEFAULT cyl 60791 alt 2 hd 255 sec 63>
/pci@0,0/pci-ide@5/ide@0/cmdk@0,0
1. c2d0 <DEFAULT cyl 60791 alt 2 hd 255 sec 63>
/pci@0,0/pci-ide@5/ide@1/cmdk@0,0
Specify disk (enter its number): 0
selecting c1d0
Controller working list found
[disk formatted, defect list found]
Warning: Current Disk has mounted partitions.
/dev/dsk/c1d0s0 is currently mounted on /. Please see umount(1M).
/dev/dsk/c1d0s1 is currently used by swap. Please see swap(1M).
/dev/dsk/c1d0s6 is currently mounted on /lu. Please see umount(1M).
[...]
partition> p
Current partition table (original):
Total disk cylinders available: 60791 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 4657 - 8481 29.30GB (3825/0/0) 61448625
1 swap wu 3 - 767 5.86GB (765/0/0) 12289725
2 backup wm 0 - 60790 465.68GB (60791/0/0) 976607415
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 8482 - 60790 400.71GB (52309/0/0) 840344085
6 unassigned wm 832 - 4656 29.30GB (3825/0/0) 61448625
7 unassigned wm 768 - 831 502.03MB (64/0/0) 1028160
8 boot wu 0 - 0 7.84MB (1/0/0) 16065
9 alternates wu 1 - 2 15.69MB (2/0/0) 32130
bash-3.00# df -h
Filesystem size used avail capacity Mounted on
/dev/dsk/c1d0s0 29G 4.4G 24G 16% /
/devices 0K 0K 0K 0% /devices
ctfs 0K 0K 0K 0% /system/contract
proc 0K 0K 0K 0% /proc
mnttab 0K 0K 0K 0% /etc/mnttab
swap 10G 816K 10G 1% /etc/svc/volatile
objfs 0K 0K 0K 0% /system/object
fd 0K 0K 0K 0% /dev/fd
swap 10G 45M 10G 1% /tmp
swap 10G 20K 10G 1% /var/run
/dev/dsk/c1d0s6 29G 2.7G 26G 10% /lu
/dev/dsk/c1d0p1 55M 2K 55M 1% /diagpart
/usr/lib/libc/libc_hwcap2.so.1
29G 4.4G 24G 16% /lib/libc.so.1
Now:
bash-3.00# metadb -a -c 2 -f c1d0s7
metadb: flip: c1d0s7: overlaps with c1d0p1 which is mounted as '/diagpart'
Could you please advice how to solve the problem ?
przemol
-- http://przemol.blogspot.com/ ---------------------------------------------------------------------- Pokaz innym kto tu rzadzi! Kliknij >>> http://link.interia.pl/f1bbc _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:21 EDT