From: Niklesh Jethwa (n.jethwa@runbox.com)
Date: Tue Sep 11 2007 - 09:12:46 EDT
Hi,
I have set up a DHCP and install server on the same machine (SunFire 480)
and I am attempting to net boot another identical machine from this one
and use Jumpstart to perform a custom Flash Archive install onto the
empty machine. Hopefully I should end up with two identical machines.
However I am getting a:
"panic - boot: Could not mount filesystem" error.
I have checked the nfs shares and jumpstart profile, all seems ok to me.
This is an output of the error received:
Rebooting with command: boot net:dhcp
Boot device: /pci@9,700000/network@2:dhcp File and args:
WARNING: Power Supply 1 not receiving AC power.
/pci@9,700000/network@2: 100 Mbps full duplex link up
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Timeout waiting for BOOTP/DHCP reply. Retrying ...
WARNING: Power Supply 1 not receiving AC power.
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Timeout waiting for BOOTP/DHCP reply. Retrying ...
Failed to receive config params
Restarting DHCP process ...
4000 /pci@9,700000/network@2: 100 Mbps full duplex link up
panic - boot: Could not mount filesystem.
Program terminated
{2} ok
This is the snoop on packets from the install server:
testBack# snoop 0:3:ba:a8:ea:59
Using device /dev/ce (promiscuous mode)
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
testBack -> 10.37.3.15 DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPDISCOVER
testBack -> 10.37.3.15 ICMP Echo request (ID: 4 Sequence number: 0)
testBack -> 10.37.3.15 DHCP/BOOTP DHCPOFFER
OLD-BROADCAST -> BROADCAST DHCP/BOOTP DHCPREQUEST
testBack -> 10.37.3.15 DHCP/BOOTP DHCPACK
OLD-BROADCAST -> (broadcast) ARP C Who is 10.37.3.15, 10.37.3.15 ?
10.37.3.15 -> 10.37.3.15 ARP R 10.37.3.15, 10.37.3.15 is
0:3:ba:a8:ea:59
10.37.3.15 -> (broadcast) ARP C Who is 10.37.3.17, testBack ?
testBack -> 10.37.3.15 ARP R 10.37.3.17, testBack is 0:3:ba:a8:df:6b
10.37.3.15 -> testBack TFTP Read "010003BAA8EA59" (octet)
testBack -> 10.37.3.15 TFTP Data block 1 (512 bytes)
10.37.3.15 -> testBack TFTP Ack block 1
testBack -> 10.37.3.15 TFTP Data block 2 (512 bytes)
10.37.3.15 -> testBack TFTP Ack block 2
testBack -> 10.37.3.15 TFTP Data block 3 (512 bytes)
10.37.3.15 -> testBack TFTP Ack block 3
testBack -> 10.37.3.15 TFTP Data block 4 (512 bytes)
...
...
...
Any help would be muchly appreciated
Regards
Nik
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:18 EDT