T1000 ALOM not responding

From: James W. Abendschan (jwa@jammed.com)
Date: Fri Sep 07 2007 - 21:32:23 EDT

• Next message: Ayaz Anjum: "Summary: ufs fssnap with/without Sun cluster !"
• Previous message: Michael Hale: "controllers renumbered out from under SDS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello -- I have a T1000 (Solaris 10 update 3) with
an ALOM that is not responding. I'm unable to
connect to it over the network, and I cannot connect
to it through the serial port .. it does not respond to
keypresses, including '#.' and a hard break. I tried
baud rates other than 9600 just to be sure, but nothing.

The fault light is lit -- but I'm unable to determine what's
causing the fault, because I can't login to the ALOM :)

Other than the frozen ALOM & the fault light, the
box appears to be functioning normally. 'fmdump'
and 'fmadm faulty' show no failures.

Suggestions?

thanks,
James
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

• Next message: Ayaz Anjum: "Summary: ufs fssnap with/without Sun cluster !"
• Previous message: Michael Hale: "controllers renumbered out from under SDS"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:18 EDT