From: Matthew L Chesler (mchesler@raytheon.com)
Date: Tue Jun 19 2007 - 13:37:45 EDT
Hi all,
I have some SunBlade 2500s with XVR-100 cards in them. The machine is
connected to an LCD flat panel via a DVI-I Dual Link cable. On occasion,
the monitor switches to the analog input and the video appears with
incorrect colors and some display abberations. I've found that I can
eliminate this problem by swapping the cable out for a DVI-D cable that
does not support analog. Is there a way to configure the card through
software to only output digital video, even if a DVI-I cable is present?
Any help is greatly appreciated.
-Matt
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:04 EDT