From: Gary Brett (gary.brett@fidessa.com)
Date: Tue Jun 05 2007 - 09:30:01 EDT
Hi there
I have hundreds of SPARC boxes, and im looking to write a script that
will determine how many power supplies are active on each box. I have a
mix of 210/240/440/880/280/220/v100/netra's etc etc etc. I tried
grepping for PS in prtdiag -v, but the outputs vary significantly based
on the hardware and firmware revisions, some of them don't even have a
section for Power supplies
Does anybody know a way I can search for this information to avoid
having to walk around the data centres. Should I use prtdiag, or is
there another utility I could use to determine this information?
Any help on this would be greatly appreciated
Cheers
Gary
*****************************************************************************
*****************************************************************************
**********************************
This message is intended only for the stated addressee(s) and may be
confidential. Access to this email by anyone else is unauthorised. Any
opinions expressed in this email do not necessarily reflect the opinions of
Fidessa. Any unauthorised disclosure, use or dissemination, either whole or in
part is prohibited. If you are not the intended recipient of this message,
please notify the sender immediately.
Fidessa plc - Registered office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3781700 VAT registration no. 688 9008 78
Fidessa group plc - Registered Office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3234176 VAT registration no. 688 9008 78
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:42:02 EDT