X1 jumpstart error - Unable to mount /cdrom/Solaris_*/Tools/Boot/usr

From: Charles Funderburk (charles.t.funderburk@mail.sprint.com)
Date: Thu Jul 18 2002 - 15:45:23 EDT


Hello Sun Gurus

I've searched the archives and have found similar issues, but there were not
any summaries. Perhaps someone has some infinite wisdow? :)

Here's what happens:

Executing last command: boot net
Boot device: /pci@1f,0/ethernet@c File and args:
Timeout waiting for ARP/RARP packet
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
NOTICE: dmfe0: PHY 1 link up 100 Mbps Full-Duplex
NOTICE: dmfe1: PHY 1 link down
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface dmfe1
Configured interface dmfe0
Usage:
mount [-v | -p]
mount [-F FSType] [-V] [current_options] [-o specific_options]
        {special | mount_point}
mount [-F FSType] [-V] [current_options] [-o specific_options]
        special mount_point
mount -a [-F FSType ] [-V] [current_options] [-o specific_options]
        [mount_point ...]
Unable to mount /cdrom/Solaris_*/Tools/Boot/usr

Why is the client attempting to mount the cdrom? I have the boot server path,
install path, and install_config path set in /etc/bootparams.
I'm using a netra T1 (Solaris 8 2/02). I've added the X1 patches, but have
seen on other posts that the drivers were included in th 2/02 release.Do I
need to back out of the X1 patch?If so, how do I back out since I issued the
following modify script to install the patch. - modify_install_server -d
/usr/install

I've also restarted the nfs.server and verified the directories are set
properly.

Thanks!

-Charles Funderburk
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:24:37 EDT