From: Gary Brett (gary.brett@fidessa.com)
Date: Tue Apr 17 2007 - 05:23:10 EDT
Guys
Really quick question, Im looking to set up hardware mirroring (RAID1)
on my v440 boxes using the raidctl utility. I have currently got my
x4100 boxes mirrored using this method (albeit from the BIOS based
utility rather than raidctl) and all is good, I can mirror my 4 disks
into two sets of 2 (i.e. c0t0 mirrored with c0t2 and c0t1 mirrored with
c0t3)
Now ive been reading up on v440 hardware mirroring and it says I can
only create one mirror involving a max of two disks, is this correct
.....??? I find this very strange considering the box has 4 disks. ...so
I can only mirror 2 of them .....surely I am mis-reading this
Any help would be greatly appreciated
Cheers
Gary
*****************************************************************************
*****************************************************************************
**********************************
This message is intended only for the stated addressee(s) and may be
confidential. Access to this email by anyone else is unauthorised. Any
opinions expressed in this email do not necessarily reflect the opinions of
royalblue. Any unauthorised disclosure, use or dissemination, either whole or
in part is prohibited. If you are not the intended recipient of this message,
please notify the sender immediately.
royalblue financial plc - Registered office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3781700 VAT registration no. 688 9008 78
royalblue group plc - Registered Office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3234176 VAT registration no. 688 9008 78
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:53 EDT