From: Fergus McMenemie (fergus@twig.demon.co.uk)
Date: Tue Apr 10 2007 - 10:17:06 EDT
Hi all,
I had to borrow a cdrom drive, and with hindsight I
stupidly, left the cdrom drive installed in my Sunfire
v120 while I installed and configured Disksuite under
solaris 8. I have used Disksuite to mirror the boot drive.
The Sunfire V120's have an odd feature in that the
numbering of the internal disk drives changes depending
on whether a cdrom drive is present or not! With a Cdrom
installed, I have:-
c1t0d0 and c1t1d0
Without one, I have
c0t0d0 and c0t1d0
I am having to return the cdrom drive to its proper
location. What changes with I have to make to the
Disksuite configuration to allow for the controller
changing name?
Thanks in advance
-- =============================================================== Fergus McMenemie Email:fergus@twig.demon.co.uk. Techmore Ltd Phone:(UK) 07721 376021 Unix/Mac/Intranets Analyst Programmer =============================================================== _______________________________________________ sunmanagers mailing list sunmanagers@sunmanagers.org http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:52 EDT