From: Gary Brett (gary.brett@fidessa.com)
Date: Thu Mar 22 2007 - 07:45:39 EST
Hi, I have two questions about the Sunfire X4100
1) Does anybody know how to power on an x4100 from the SP/ILOM prompt? On the
sparc boxes, from the sc> prompt I could issue a poweron or a reset-all
command to save me physically going to the machine and pressing the button. On
the x4100's I tried using "reset /SP" but all that does is restart ILOM again
2) These x4100 boxes take sooooooo long to boot up , they sit at the "Sun
Microsystems" disclaimer bit for nigh on ten minutes before we see
"configuring Devices" pop up on the screen......Is there any way to speed this
up or even to get a more verbose output of what its actually doing for this
time ...(if indeed its doing anything at all)...I have v880's that boot up
twice as fast ...
Any help on these would be greatly appreciated
Cheers
Gary
*****************************************************************************
*****************************************************************************
**********************************
This message is intended only for the stated addressee(s) and may be
confidential. Access to this email by anyone else is unauthorised. Any
opinions expressed in this email do not necessarily reflect the opinions of
royalblue. Any unauthorised disclosure, use or dissemination, either whole or
in part is prohibited. If you are not the intended recipient of this message,
please notify the sender immediately.
royalblue financial plc - Registered office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3781700 VAT registration no. 688 9008 78
royalblue group plc - Registered Office:
Dukes Court, Duke Street, Woking, Surrey, GU21 5BH, United Kingdom
Registered in England no. 3234176 VAT registration no. 688 9008 78
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:47 EDT