From: Tobias Nutt (tobias.nutt@sar.de)
Date: Thu Mar 15 2007 - 02:42:55 EST
Hi all,
I have Problems with a tape-Library P1000 from ATL/Quantum
(http://www.quantum.com/ServiceandSupport/SoftwareandDocumentationDownloads/P1000/Index.aspx)
I see devices in OBP but no devices in /dev/rmt.
The configuration is:
root@backup # grep -v '#' /kernel/drv/fcaw.conf | sort -u
busy_retry_delay = 500;
class2_enable = 0;
def_hba_binding = "fcaw*";
def_port_binding = "xxxxxx";
def_wwnn_binding = "$xxxxxxxxxxxxxxxx";
def_wwpn_binding = "$xxxxxxxxxxxxxxxx";
failover = 30;
failover_extension = 0;
fca_heartbeat = 0;
fca_nport = 0;
fca_verbose = 1;
ip_compliant = 0;
ip_disable = 1;
link_recovery_delay = 1000;
public_loop = 0;
qfull_retry_count = 0;
qfull_retry_interval = 1000;
recovery_attempts = 5;
reset_glm = 0;
scsi-initiator-id = 125;
scsi_probe_delay = 5000;
target_controllers = 5000;
timeout_reset_enable = 0;
root@backup # grep -v '#' st.conf| sort -u
DLT7k-data = 1, 0x38, 0, 0x0D639, 4, 0x82, 0x83, 0x84, 0x85, 2;
name="st" class="scsi" target=0 lun=0;
name="st" class="scsi" target=1 lun=0;
name="st" class="scsi" target=10 lun=0;
name="st" class="scsi" target=11 lun=0;
name="st" class="scsi" target=12 lun=0;
name="st" class="scsi" target=125 lun=0;
name="st" class="scsi" target=13 lun=0;
name="st" class="scsi" target=14 lun=0;
name="st" class="scsi" target=15 lun=0;
name="st" class="scsi" target=16 lun=0;
name="st" class="scsi" target=17 lun=0;
name="st" class="scsi" target=18 lun=0;
name="st" class="scsi" target=19 lun=0;
name="st" class="scsi" target=2 lun=0;
name="st" class="scsi" target=20 lun=0;
name="st" class="scsi" target=21 lun=0;
name="st" class="scsi" target=22 lun=0;
name="st" class="scsi" target=23 lun=0;
name="st" class="scsi" target=24 lun=0;
name="st" class="scsi" target=25 lun=0;
name="st" class="scsi" target=26 lun=0;
name="st" class="scsi" target=27 lun=0;
name="st" class="scsi" target=28 lun=0;
name="st" class="scsi" target=29 lun=0;
name="st" class="scsi" target=3 lun=0;
name="st" class="scsi" target=30 lun=0;
name="st" class="scsi" target=4 lun=0;
name="st" class="scsi" target=5 lun=0;
name="st" class="scsi" target=6 lun=0;
name="st" class="scsi" target=8 lun=0;
name="st" class="scsi" target=9 lun=0;
name="st" parent="fcaw" target=0;
"QUANTUM DLT7000", "Quantum DLT7000", "DLT7k-data",
"SUN DLT7000", "Sun DLT7000", "DLT7k-data",
root@backup # grep fcaw1 /var/adm/messages
Mar 15 05:59:21 backup fcaw: [ID 451854 kern.notice] fcaw1: JNI Fibre
Channel Adapter model FCW
Mar 15 05:59:21 backup fcaw: [ID 451854 kern.notice] fcaw1: 64-bit SBus
2: IRQ 3: FCODE Version 13.5.7 [1a5e9b]: SCSI ID 125: AL_PA 01
Mar 15 05:59:21 backup fcaw: [ID 451854 kern.notice] fcaw1: Fibre
Channel WWNN: 100000E069410E88 WWPN: 200000E0694123E8
Mar 15 05:59:21 backup fcaw: [ID 451854 kern.notice] fcaw1: FCA SCSI/IP
Driver Version 2.6.12, Nov 18, 2002 for Solaris 64-bit
Mar 15 05:59:22 backup fcaw: [ID 451854 kern.notice] fcaw1: All Rights
Reserved.
Mar 15 05:59:22 backup fcaw: [ID 580805 kern.info] fcaw1: < Total IOPB
space used: 1144256 bytes >
Mar 15 05:59:22 backup fcaw: [ID 580805 kern.info] fcaw1: < Total DMA
space used: 5312541 bytes >
Mar 15 05:59:22 backup fcaw: [ID 297457 kern.notice] NOTICE: fcaw1 LOOP
Initialization Complete, AL_PA=01
Mar 15 05:59:22 backup fcaw: [ID 451854 kern.notice] fcaw1: Host: Port
000001 (100000E069410E88:200000E0694123E8)
Mar 15 05:59:23 backup fcaw: [ID 451854 kern.notice] fcaw1: Port 0000EF
(50050840000A5000:50050840000A5000) available.
Mar 15 05:59:28 backup fcaw: [ID 451854 kern.notice] fcaw1: Target 0 Lun
0: Port 0000EF (50050840000A5000:50050840000A5000) present.
any hints?
TIA
Tobias
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:46 EDT