From: Steven Sim (steven.sim@faplccc.net)
Date: Wed Mar 14 2007 - 08:21:56 EST
Gurus;
An attempt to configure 2 x bge ports on the Sun Fire v240 to aggregate
their links using Solaris 10's new dladm command was "partially"
successful.
We noted the following messages upon a successful reboot;
mysolaris console login: WARNING: IP: Proxy ARP problem? Hardware address '00:14:4f:65:2d:86' thinks it is 192.168.023.040
WARNING: IP: Hardware address '00:14:4f:65:2d:86' trying to be our address 192.168.023.040!
Mar 14 13:14:01 inetd[223]: authdes_refresh: keyserv(1m) is unable to encrypt session key
WARNING: IP: Hardware address '00:14:4f:65:2d:86' trying to be our address 192.168.023.040!
dladm show-aggr indicated both ports to be fully up and running.
My questions are;
Does the aggregate link feature require the network administrator to
configure a LAG for the ports on the switch?
How would we know from the system side whether the network switch is
properly configure to support the above?
And lastly, is the above due to a lack of configuration on the network
switch side or something else entirely?
Warmest Regards
Steven Sim
Fujitsu Asia Pte. Ltd.
_____________________________________________________
This e-mail is confidential and may also be privileged. If you are not
the intended recipient, please notify us immediately. You should not copy
or use it for any purpose, nor disclose its contents to any other person.
Opinions, conclusions and other information in this message that do not
relate to the official business of my firm shall be understood as neither
given nor endorsed by it.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:45 EDT