From: Ray Stell (stellr@cns.vt.edu)
Date: Fri Mar 09 2007 - 20:22:01 EST
I asked why sys-unconfig did not cause sysidtool to run after the reboot
on an x4200 running solaris 10. I didn't get an answer to this question.
I don't know if that means it does work for others and I'm just lucky
or if sys-unconfig is busted and nobody uses it anymore.
Micah DesJardins suggested a touch of /reconfigure and reboot as a method.
This did not cause sysidtool to fire up for me either.
Richard Skelton asked me what /etc/.sysIDtool.state and /etc/.UNCONFIGURED
looked like wrt http://sysunconfig.net/unixtips/sysunconfig_sol8.txt
I changed them as suggested and that did not cause sysidtool to start.
There were two posts on various files to edit by hand to change the
network config:
Micah:
------
/etc/hosts change the ip and the name.
/etc/hostname.hme0 put in the new hostname, It may also be Ie0 it
depends on your machine. (mine is e1000g0)
/etc/defaultrouter new gateway
/etc/defaultdomain
/etc/nodename host name
Tom Zurita:
-----------
/etc/netmasks
/etc/ inet/ipnodes this is for IPv6
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:44 EDT