From: Riolym Diola-Delfin (riolym@gmail.com)
Date: Wed Mar 07 2007 - 05:15:38 EST
Hello Guys,
I have a solaris10 machine that has the following routing table:
Destination Gateway Flags Ref Use Interface
-------------------- -------------------- ----- ----- ------ ---------
192.168.10.0 192.168.10.10 U 1 63 dmfe0:1
10.10.10.0 10.10.10.10 U 1 42 dmfe0
default 192.168.10.1 UG 1 2
127.0.0.1 127.0.0.1 UH 1 150 lo0
I dont have problems accessing both 10.10.10.10 and 192.168.10.10 using
192.168.10.1 as default router. However if I switch the default route to
10.10.10.1, only 10.10.10.10 IP is accessible. Both network sits on the same
switch. Is there anyway i can have solaris use either of the 2 gws but still
have both IPs accessible. Thanks.
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:43 EDT