From: Darren Brechman-Toussaint (Darren.Toussaint@SecurityMail.com.au)
Date: Wed Feb 28 2007 - 19:34:29 EST
I have a Solaris 10 (6/06) box that is connected to a SAN that
originally had 2 disks from the SAN available.
After enabling multipathing, everything was working fine and I could use
'stmsboot -L' to show the mapping between the real disk names and the
multipathed disk name.
Now I have assigned 2 more disks from the SAN to the server, these disk
show up in format and are usable. When I run 'stmsboot -L' it only shows
the original SAN disks that were available when multipathing was
enabled. Is there another command/method of finding out the mapping from
multipathed disk name to real disk name for these new disks?
Thanks
Darren
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:42 EDT