From: José Ordoñez (jose.ordonez@gmail.com)
Date: Fri Feb 23 2007 - 21:07:03 EST
Hi,
I have a recently inherited a Sun StorEdge T300 at work and we don't know
the password, so I've been hitting Google hard trying to figure it out. So
far I've gotten to the "set z" command, which is temporarily resetting the
config for me, which allows me to set TP, netmask, Gateway, hostname,
passwd. After doing so, I hit reset and the T300 reboots and I can ping the
box (yes!) only at some point it goes back to the initial 10.0.0.2 IP
address and I am back to where I started (NO!). So I was hoping that one of
you could help me out? I am adding some more info. here to help you in your
assistance. Much thanks in advance!
T3B Release 3.1.6 Thu Feb 3 16:39:28 PST 2005 (10.17.6.230)
Copyright (C) 1997-2003 Sun Microsystems, Inc.
All Rights Reserved.
Initializing software...
Mounting tmp volume...
Starting RAS Daemons...
Found units: [u1-ctr]
Default master is u1
Starting Heartbeats...
Assigning Select IDs: u1(1)
Initializing system drivers...
Initializing XPT component...
Initializing QLCF component...
Initializing loop 1 ISP2200 ... firmware status = 3
Detected 10 FC-AL ports on loop 1
loop 1 TARGET_ID = 0x0 (ALPA = 0xef)
Initializing loop 2 ISP2200 ... firmware status = 3
Detected 10 FC-AL ports on loop 2
loop 2 TARGET_ID = 0x0 (ALPA = 0xef)
Initializing SVD services...
Detected data cache size in system: 1GB
Testing ISP2200/ISP2310... Passed
Testing ECC mechanism... Passed
Testing XOR functions and datapaths... Passed
Cold Boot detected; destructive tests OK...
Testing data cache memory... Passed
Initializing Cache Memory...
IP address changed to 10.0.0.2 _here is where it reset to the old password.
Reset to activate new IP address...
Thanks,
-Jose
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:41 EDT