From: mark inaba (inabasun@gmail.com)
Date: Thu Feb 22 2007 - 12:12:36 EST
has anyone seen something like this or know where to fix it?
machine: v880
solaris 8
sun cluster 3.1
OPS (so udlms)
vxvm 3.5
when i try to boot this machine -sx it always produces nonascii after
"VxVM general startup".
I believe it has switched baud rate on the serial port because i consistently
get a y with two dots over it whenever i hit return.
i tried rebooting our terminal server, but the problem seems to be on
the v880 because
the behavior remains the same until the v880 is power cycled. then
everything is normal,
unless i do a boot -sx. after VxVM general start, it goes into
gibberish mode again.
what is interesting is that boot -x works fine, it boots all the way
up with no complaints...
however..when i do init s...it comes down and then goes in the the
same gibberish mode
where returns produce y's with two dots over it. hoping someone might
have some insight into this behavior...
-mark
here's an example of boot -sx
ok boot disk works!!
boot -sx does not still
Rebooting with command: boot -sx
Boot device: /pci@8,600000/SUNW,qlc@2/fp@0,0/disk@w21000000871a4235,0:a
File and args: -sx
SunOS Release 5.8 Version Generic_117350-05 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Starting VxVM restore daemon...
VxVM starting in boot mode...
configuring IPv4 interfaces: ce2 ce3 ce4 ce5 ce6 ce7 ce8Feb 18
04:42:00 in.mpathd[57]: Failures cannot be detected on ce6 as no
IFF_NOFAILOVER address is available
ce9 eri0.
Hostname: prdgc01a
VxVM starting special volumes ( swapvol rootvol var rootdisk_27vol )...
Not booting as part of a cluster
VxVM general startup...
Feb 18 04:42:41 in.mpathd[57]: Failure detection restored on ce6 as an
IFF_NOFAILOVER address is available
g/unO_g-nIk|cs^iLkR|N~
here's an example of multiuser going down to single user:
root@prdgc01a:/># init s
**** SYSCON CHANGED TO /dev/pts/1 ****
root@prdgc01a:/># You have
running jobs
INIT: New run level: S
The system is coming down for administration. Please wait.
Unmounting
remote filesystems: /vol nfs done.
Feb 18 05:21:09 prdgc01a /usr/sbin/vold[1692]:
problem unmounting /vol; Interrupted system call
Print services stopped.
Feb 18 05:21:10 prdgc01a syslogd: going down on signal
15
WARNING: ce0: fault detected external to device; service degraded
WARNING: ce0: xcvr addr:0x00 - link down
NOTICE: ce0: fault cleared external to
device; service available
NOTICE: ce0: xcvr addr:0x00 - link up 1000 Mbps full duplex
Killing user processes: Agent: Terminating from signal 15
WARNING: ce1: fault
detected external to device; service degraded
WARNING: ce1: xcvr addr:0x00 - link down
NOTICE: ce1: fault cleared external to device; service available
NOTICE: ce1:
xcvr addr:0x00 - link up 1000 Mbps full duplex
done.
z{BjB_jSOcs^iLkR|N~
_______________________________________________
sunmanagers mailing list
sunmanagers@sunmanagers.org
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
This archive was generated by hypermail 2.1.7 : Wed Apr 09 2008 - 23:41:41 EDT